STEP STAND
 
Customer No. :   
About Irwin Wire Products Contact Us Download Catalogue Order Form
   
Display Stands  
  Back to top
Step Stand

 

One of our best designs!  Extremly adaptable

                     Nominal size:  shelves 320mm wide and 350 to 400mm apart.

Pictured is our 1600mm square model but:

* Shelves can be made longer for a rectangular shape

        - or built into an internal corner

        - or around an external corner

        - or against a wall with end cap only on outer end

 * Brilliant access all around!

*  Overall size of stand, depth of shelves and height all your choice.

* Easy to assemble

* Fully galvanized

 

 
   
  Back to top
INTERNAL CORNER

Part of our Step Stand range.The Stand shown is 2000mm long against each wall.

Nominal Size: shelves are 320mm wide. Approx 1000mm deep overall.

However the stand can be made to any length along both walls or just one wall – say 3000mm on one wall and just 1500mm on the other.

A totally flexible design, very adaptable.

 Note the walk through bottom shelf which gives easy access right into the corner.

 The overall size of the stand, depth of shelves and height are all your choice.

  • Easy to assemble
  • Fully galavnised
 
   
  Back to top
EXTERNAL CORNER

Part of our Step Stand range.

The Stand shown is 2000mm long against each wall.

 Nominal size: shelves are 320mm wide: Approx 1000mm deep overall.

 However the stand can be made to any length along both walls or just one wall – say 3000mm on one wall and just 1500mm on the other.

 A totally flexible design, very adaptable.

 The overall size of the stand, depth of shelves and height are all your choice.

  • Easy to assemble
  • Fully galavnised
 
   
  Back to top
2 LEVEL

Another adaptation  in our Step Stand range.

 

Nominal size: Bottom shelves 500mm wide and top shelf 720mm wide. Approx 1750mm wide overall.

 

The stand has big wide shelves for maximum display area.  The stand is wide but it’s still easy to reach all parts of the display.

 

This stand can be configured in a number of ways –

·        A  half round end cap can be added to both ends (or left off all together)  The model shown with just one end cap can be backed against a wall for a very effective display

·        Or with end caps on both ends the stand is ideal for the middle of your display area – accessible from all sides.

 

The stand, in any configuration, can be made to any length, with or without end caps.